Write a Review

Filter By:

  • Show More Brands

  • Show Fewer Brands

29-Inch

DT Swiss M 1700 Spline 25
$348.00 - $519.00
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
DT Swiss H 1700 Spline 30
$394.00 - $526.00
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
DT Swiss M 1700 Spline 30
$374.00 - $532.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
Specialized Roval Traverse Carbon 148 29-inch Wheelset
$1,200.00
The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously fast rolling 29 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear -Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for the front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1800g
Specialized Roval Traverse Fattie 29 148
$650.00
In the early design phases of our Traverse Fattie 29, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a proper, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.
Stan's NoTubes Crest S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Crest S1 Wheelset - Use: Aggressive Cross Country and Trail - Internal Rim Width: 23mm - Optimal Tire Size: 2.0 to 2.25-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,649g ), 27.5-inch (1,731g), and 29-inch (1,813g)
Stan's NoTubes Arch S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Stan's NoTubes Arch MK3 29 Front Wheels
$309.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps
DT Swiss EX 1501 Spline ONE 25
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
Stan's NoTubes Flow S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
Stan's NoTubes Flow MK3 29 Front Wheels
$309.00
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
Ritchey WCS Carbon Vantage Wheelset: 29-inch Boost Centerlock Tubeless
$1,499.00
The WCS Vantage wheel is as advanced as it gets, but shares DNA with earlier Ritchey models raced to numerous National and World Cup podiums in the 1990’s. Those decades of winning heritage beautifully coalesce with modern advancements and standards to produce a mountain bike wheel that’s strong, nimble, and built to perform and win. Featuring a new, wider 3mm tall OCR (Off Center Rim) profile, BOOST hub widths, and incredibly tough monocoque design, the Vantage is at the front of the pack in terms of weight, stiffness, and durability. The OCR build also reduces wheel dish and improves spoke bracing angle for a stronger, laterally stiffer build. The tubeless-ready, 26mm internal-width rim boosts air volume and reduces sidewall flex when riding big tires. - WCS Vantage tubeless 24h OCR rims - Tubeless Ready internal profile - Rim diameter: 29" - Rim depth: 25mm - Outer width: 32mm - Inner width: 26mm - Hubs: Ritchey-designed cold-forged WCS hubs with oversized, premium quality cartridge bearings - Front BOOST Hub: 110 x 15mm - Rear BOOST Hub: 148 x 12mm - Spokes: DT Competition Black - Nipples: DT Brass Black - Build: 24/2x - Freehub: alloy - Shimano Center Lock Disc Brake Mount (6-bolt adapters sold separately) - SRAM XX1 (XD) driver available - Matte carbon finish - Weight (27.5): 736g (front) / 817g (rear)
DT Swiss EX 1501 Spline ONE 30
$565.00 - $776.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
Stan's NoTubes Sentry S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Sentry S1 Wheelset - Use: Plus Tire Performance and Adventure - Internal Rim Width: 32mm - Optimal Tire Size: 2.5 to 3.0-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,972g), 27.5-inch (2,034g), and 29-inch (2,134g)
Stan's NoTubes Baron MK3 29-inch Front
$319.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires
Stan's NoTubes Baron S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
Stan's NoTubes Major S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Major S1 Wheelset - Use: Plus Tire Adventure and Trail - Internal Rim Width: 38mm - Optimal Tire Size: 3.0 to 3.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (2,030g), 27.5-inch (2,094g), and 29-inch (2,198g).
Stan's NoTubes Baron MK3 29-inch Rear
$380.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires
ENVE M735 29-inch I9 Wheelset
$2,550.00
This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
Roval Roval Control 29 148
$650.00
When you think of lightweight XC wheels, aluminum probably doesn't come to mind. In reality, though, high-grade alloy wheels have all of the tremendous performance properties found in carbon, like light overall weight, durability, and resilience to impact. And when made with the right hands, they're perfect for competitive racers and everyday trail riders alike. The problem is that, while many carbon wheels can check these boxes with ease, most alloy wheels don't live up to these expectations. In the case of the Control 29 wheels, however, there’s finally an aluminum wheelset that's truly ready to race. What sets the Control 29 wheels apart is that they share many of the same advanced technologies as our carbon version, the Control SL. They adopt the same rim shape with a 25-millimeter inner width, extensive on-trail testing, and our Zero Bead Hook technology. Our Zero Bead Hook rim takes away the dated mountain wheel design known as a bead hook. This hook is the part of the rim that crests at the top, sitting several millimeters inward from the rim’s sidewall, and it catches the tire’s bead under its hook. We know this may not sound too bad, but the hook establishes a weak spot in the rim that's easily crushed or bent. Without a hook, a rim can be manufactured to much tighter tolerances and can be made lighter due to the hook not needing to be reinforced. For these wheels, this means that we're able to nearly equal the strength of carbon, while also making them lighter than many carbon wheels. More importantly, a Zero Bead Hook all but gets rid of the aforementioned weak spot in the rim that's plagued riders with flat spots and dents for decades. If you happen to be one of those riders that enjoys riding your four-inch travel XC bike like it’s a six-inch trail bike, you’re in luck. Our objective of low weight and reliability, at an accessible price, also carries into the Control 29 build. We hand-build each rim to our alloy hubs, which feature DT Swiss internals at the rear and a design that allows for the same spoke lengths at both front and rear, via perfectly tensioned DT Swiss Revolution J-Bend spokes and Pro Lock nipples. We fully support the art of hand-building and do so with our wheels, knowing that real people can catch things that a machine simply cannot. - Rim Type: Alloy clincher, 2Bliss Ready, Zero Bead Hook design - Rim Material: E5 high-strength alloy - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: Alloy body, 15mm thru-axle, 19 and 31mm OD end cap options included. - Rear Hub: CNC-machined alloy body, high-quality DT Swiss 360 internals, 148mm spacing, XD driver body. - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Bearing Type: Sealed cartridge - Assembly Method: Hand-built - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Total Wheelset Weight: 1690g
Roval Roval Control 29 Carbon 148
$1,200.00
It’s not often that “affordable” and “carbon” appear in the same sentence, but our Control 29 Carbon wheelset was designed to change that. Utilizing many of the same techniques used in the development of the SL iteration of the Control 29, these wheels provide the lightweight XC performance you need at a more attainable price. Creating a successful XC wheelset isn't as easy as you might think. Often times, keeping a wheel light, stiff, and strong requires an unlimited budget. So when we were asked to create a wheel that had low inertia and weight, but was also affordable, strong enough to take on rocks and roots, and wide enough to optimize traction and rolling resistance, we knew that we had our work cut out for us. We started with the notion of keeping these wheels as close to their SL brethren as possible. And with this, we explored what made the SLs so awesome in the first place, and then we implemented nearly every aspect of them. Starting with the rim, we kept our renowned Zero Hook Bead that allows for continuous fiber layup across the sidewall and rim bed. We then paired it with a wide 25-millimeter internal profile that makes it resilient to impact and creates a tire profile that’s conducive to low rolling resistance and incredible traction. On the trail, these technical traits translate to a wheelset that many XC riders have grown to love—quick accelerations on punchy climbs, swift stopping that lets you leave braking till the last second, and unprecedented reliability. Combine this with the easy to set up our 2Bliss Ready system and you have a reliable XC wheelset that’s as easy to climb on as it is to work on. To go along with the rim, we made sure to keep the lightweight, reliable, and affordable features in mind when building the wheelset, so we took DT Swiss 350 Classic hubs (15x110mm thru-axle front / 12x148mm thru-axle rear) and hand-laced them with 28 DT Swiss Competition Race spokes. Finding hand-built wheels is becoming more and more difficult, but we're fully invested in the power of the human touch. When a wheel is machine-built, there are certain margins of error that are built into the system that result in inconsistencies. With a real person building your wheels, however, you're sure to get a wheelset that's free of imperfections. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design, black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 25mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race J-bend - Nipple Type: DT Swiss Alloy Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD end caps. - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, 12x148mm, includes SRAM XX1 XD freehub. - Includes 31mm OD end caps for front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1610g
DT Swiss HX 1501 Spline ONE 30
$611.00 - $809.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
Giant P-TRX1 29er Rear Wheel
$216.00 $575.00 62% Off
Giant's P-TRX1 29er Rear Wheel is a light, durable aluminum wheel that's ready to hit the trails. This hoop is tubeless-compatible with the supplied tape and valve, and is laced to Giant's aluminum shell for miles of smooth, efficient rolling. And with DT Swiss' patented star ratchet system, you'll get superior engagement. The rim is also 28mm-wide for great performance with wide tires.
Stan's NoTubes Crest MK3 29 Rear Wheels
$370.00
Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim
Stan's NoTubes Arch MK3 29 Rear Wheels (SRAM XD)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release
Stan's NoTubes Arch MK3 29 Rear Wheels (Shimano)
$370.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release
Stan's NoTubes Crest CB7 29-inch Rear
$720.00
Not all carbon rims are created equal. If your carbon rim is too stiff, you're losing speed and risking tire pinch flats. The Stan’s Crest CB7 rim with RiACT absorbs radial vibrations and damps impacts. It's a difference you can feel in the ride of the bike almost instantly. First introduced with Stan's legendary Valor rim, Stan's impact-absorbing RiACT technology has evolved to be more responsive and even more durable. The Crest CB7's new layup and rim shape allows for 10mm of radial compliance to absorb larger impacts. The new rim also matches the Valor's strength while using less material to save weight. And when it comes to the lateral stiffness needed for steering precision and control, the new CB7 layup delivers. Wider than the original Valor while still optimized for XC tire widths, the Crest CB7 keeps you in control and rolling faster. Stan’s backs up the technology in every Crest CB7 rim with one of the best warranties available, including lifetime crash replacement. Better by design, the Crest CB7 is the most advanced rim available for creating a lighter, stronger, more reliable, and faster rolling wheelset. - Designed for cross country racing and riding - Patented low-profile sidewalls and 23mm internal rim width - Ultra-light 325g (29") rim weight - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for easier tubeless setup and the best reliability - WideRight rim design optimized for 2.00 - 2.25-inch tires
Race Face Aeffect R 29-inch Rear
$324.99
Boasting a 30mm internal rim width and increased strength, the Aeffect R is built to shred aggressive all-mountain trails and Enduro races. In addition to a great rim, the Aeffect R incorporates a new Race Face Trace hub design with full cartridge bearings for extended life and durability. The hub also boasts a competitive 9.2-degrees of engagement using a durable the 3 pawl design. These hubs are tough, think a clydesdale with a motor kind of tough. Aeffect wheels can handle almost anything you can throw at them. - Brushed finish, water transfer graphics - One spoke length throughout wheelset - Rim decal kits available separately in 8 colors (sold separately) - 9.2-degree hub engagement - Standard 6 bolt brake rotor mount - Extra spokes (5) included with rear wheels - Straight pull Double Butted spokes with Silver Brass nipples
Stan's NoTubes Crest CB7 29-inch Front
$679.00
All carbon rims are not created equal. If your carbon rim is too stiff, you're losing speed and risking tire pinch flats. The Crest CB7 rim with RiACT absorbs radial vibrations and damps impacts. It's a difference you can feel in the ride of the bike almost instantly. First introduced with Stan's legendary Valor rim, Stan's impact absorbing RiACT technology has evolved to be more responsive and even more durable. The Crest CB7's new layup and rim shape allows for 10mm of radial compliance to absorb larger impacts. The new rim also matches the Valor's strength while using less material to save weight. And when it comes to the lateral stiffness needed for steering precision and control, the new CB7 layup delivers. Wider than the original Valor while still optimized for XC tire widths, the Crest CB7 keeps you in control and rolling faster. Like all Stan's rims, the Crest CB7's patented Bead Socket Technology sets the standard for easy tubeless setup and reliability. Combined with quality Sapim spokes and nipples, and Stan's updated Neo hub, the Crest CB7 wheelset is a fast, light, and fully serviceable option for XC racing on even the most demanding courses. The Crest CB7 is laced with Sapim Force j-bend spokes in lengths readily available at most shops and features Sapim's Secure Lock mechanically locking nipples for trouble-free riding. The next generation of Neo hub in the Crest CB7 wheelset includes a Durasync 6-pawl freehub with fast 10-degree engagement, and triple freehub bearings to better distribute axle load. Like all Stan's wheelsets, the Crest CB7 is available in multiple configurations to fit just about every axle style and cassette type and is available in both Centerlock and 6-bolt models. Backed up by a solid 5-year warranty and lifetime crash replacement (with registration), the Crest CB7 wheelset is ready to shave seconds off your lap times. Crest CB7 wheels include pre-installed tape for tubeless use and presta valves. - Designed for cross country racing and riding - Patented low-profile sidewalls and 23mm internal rim width - 100% CNC machined hubs with 6-pawl simultaneous engagement - Sapim Force Black 2.0/1.7/1.8mm spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for easier tubeless setup and the best reliability - WideRight rim design optimized for 2.00 - 2.25" tires - Register your wheels for 5-year warranty and lifetime crash replacement
Quality Wheels SRAM 406 6-bolt / Sun SR25 29-inch Rear
$95.00
Our best value in Quick-release disc wheels.
Page 1 of 3 Next page