Planet Bike's amazing Protegé 9.0 is perfect for riders who want maximum information with minimal fuss. It boasts the important functions you expect like average speed, a speed comparator, a dual odometer so you can use it on 2 bikes, and it displays temperature, too. You can see any 5 of these on its easy-to-read 4-line display. The 9.0 installs easily on your handlebars.
Planet Bike's Protegé 5.0 is a great, no-nonsense computer. You want to know how fast you’re going, or how far you've ridden, or the time? It’s right there in big, bold numbers. In fact, this clever computer displays 4 readings at once so you have the data you need at a glance. The 5.0 mounts easily on your handlebars.
Planet Bike's super Protegé 9.0 is perfect for riders who want maximum information with minimal fuss. It's wireless for an ultra-clean look and easy installation on your handlebars. And, its large easy-to-read display shows the 5 functions you choose in 4 lines. It also provides the important functions you expect like average speed, a speed comparator, a dual odometer so you can use it on 2 bikes, and it reads the temperature, too.
Intuitive interface in a compact size combined with ANT+ Digital Speed and Cadence to eliminate wires and interference - Easy set-up programming for simple installation - Automatic functions create an extremely intuitive interface - Digitally coded signal eliminates interference or cross talk w/ other electronics - Wireless speed and cadence, maximum, average - Optional Heart Rate with ANT+ HR transmitter sold separately - Odometer, trip meter - Small in size, yet big digits for easy viewing
The CycleOps ANT+ Speed or Cadence Sensor accurately tracks your speed and cadence and is used along with a power meter or with an ANT+-compatible cycling computer (power meters and ANT+ computers sold separately). This unit easily attaches on the frame next to your left crankarm and rear wheel to monitor and display your cadence or speed on your cycling computer of choice.
Specialized's SpeedZone Sport Wireless provides all the data you need to quantify your rides in a neat, cordless package. Its easy-to-read, double-line display lets you quickly check speed, mileage and a whole host of other important functions. Plus, the SpeedZone's easy calibration makes setup a breeze and its interface is incredibly intuitive so you can spend more time pounding out the miles than trying to figure out how far you've ridden.
This adjustable chest strap is compatible with Sigma's STS and Rox wireless computers.
$18.75 $25.00 25% Savings
Giant's Continuum 7 is a simple way to get the most out of your rides. It tracks seven essential functions, including distance and speed, has a large, easy-to-read display, and uses a wired sensor and handlebar mount that attaches easily to your bike.
With its built-in touch display and a host of other new features, GoPro's Hero4 Silver Edition just keeps getting better. Everything from controlling the camera, framing shots, and playing back content is now ultra-convenient—just view, tap, and swipe the screen. Experience jaw-dropping 4K resolution for incredibly sharp, lifelike video and ultra-clear 1080p/60fps for striking slow motion capture. Hero4’s Protune mode lets you flex your creativity with advanced manual controls that allow you to customize settings for color, ISO limit, white balance, sharpness, and exposure. Night Photo, Night Lapse, and Auto Low Light modes deliver unprecedented clarity in low-light. The Hero4’s HiLight Tag button enables you to mark key moments while recording so you can quickly locate your best clips for convenient playback, editing, or sharing. When you’re not recording, the HiLight Tag button allows quick access to adjust settings, while simplified menus make navigation more intuitive than ever. And, with built-in Wi-Fi and Bluetooth connectivity you've got a powerful little camera that makes it easy to control, record, and share the best moments.
Garmin's Fenix 3 does everything except prepare your morning brew, which you'll need a lot of if you plan on using this watch to its fullest extent. The Fenix 3 is a rugged multi-sport GPS tool with features for serious training and outdoor navigation, yet it's stylish for everyday use so no one will know of your double life. Whether you're on the bike, trail running, or open water swimming, the Fenix has enough metrics to satisfy any outdoor junky's data cravings. Plus, with advanced fitness metrics you'll stay on top of your game during work, recovery, and even sleep. • Stainless Steel EXO antenna with GPS + GLONASS support for fast fix and accuracy • 1.2-inch sunlight readable color Chroma display • Fitness training features include VO2 Max and Recovery Adviser (when used with a heart rate monitor) • Outdoor navigation features include 3-axis compass, altimeter and barometer, TracBack and Sight’n Go • Connect IQ compatibility for customized apps, widgets, watch faces and data fields • Water rated to 100 meters
$799.99 - $1,099.99
Stages Cycling's Stages Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. It allows every rider, in every discipline, power-based (also called watt-based) training performance. With advanced technology accurate to +/- 2%, ANT+ and Bluetooth Smart transmitting, active temperature compensation, and mere 20 grams of weight, the Stages Power meter is perfect for any cyclist whether looking for their first power meter or a savvy power-training expert. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. This Stages Power Meter model is available as a Shimano Ultegra 6800 replacement left (non-drive) crankarm (shown) or integrated into the crankarm on a complete Shimano Ultegra Standard (53/39-tooth chainrings), Compact (50/34) crankset, or Mid-Compact (52/36) crankset (bottom bracket sold separately).
Protect your Garmin Edge 510 with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
Garmin brings power to the pedal with the Vector 2. Built in conjunction with Look Keo pedals, the Vector offers precise power measurement in a rugged, ultra-convenient, discreet package. Garmin encased sensitive strain gauges inside the stainless steel pedal spindles for years of durability and accuracy to within +/- 2%. The Vector is essentially two separate power meters and measures power from both legs, meaning you have the data to correct discrepancies between your left and right sides. Now you can eke out those last few watts and maximize your pedaling economy. The robust Vector 2S pods are easy to mount, and have a status light indicating when they're on and pairing occurs. Switching the pedals and pods between bikes is blissfully hassle-free and takes less time than getting kitted up. The pedal bodies are built of tough, light carbon, while the battery/ANT+ pods hang protected beneath the crank arms. At a nimble 312 grams including pedal weight, the Vector is one of the lightest power meters available.
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Keep your handlebar organized and your devices secure with the iH-400-OS (27.2/31.8/35.0mm) from Minoura. Fits most smart phones. - Holds a smartphone, cellphone, or GPS. Device is securely supported at 3 points (wings and bottom hook) - Softly padded for protecting phone surface - Just pull a small lever on backside for detaching phone, frame is attached semi permanently by hex bolt for security - New LW-Clamp reduces weight 25 grams than previous model and features a rustproof alloy clamp - 27.2mm-35mm diameter
Power to the people! Add the Pioneer Power meter to your existing Shimano crank. Pioneer's crankset-based power meters are simply some of the best power-monitoring systems on the planet, and the Upgrade Kit gives you the chance to add it to your existing crankset. At the heart of the Pioneer Power Meter System are two streamlined strain gauge monitors that can detect the slightest tangent and radial force direction as power is applied to the crank arms. This proprietary system detects the amount and the direction of force at 12 different points in each pedaling stroke for each leg, and allows you to fine tune your pedaling to find race-winning form. The Pioneer Power Meter Installation Kit comes with everything you need to package and send your existing Shimano crank to Pioneer for professional installation and calibration. - Compatible with Shimano Dura-Ace 9000 or Ultegra 6800 (Right Side Cranks Only) - Compatible Crank-arm Lengths: 165, 167.5, 170, 172.5, 175, 177.5, 180mm - Fully Integrated Strain Gauge for force measurement - Easy connectivity with ANT+ compatible Cycle Computers - HDPower Metrics when connected to Pioneer Cycle Computers - Lightweight Sensor Only 40 grams
Mount virtually any smartphone to the Thule Handlebar Mount for easy access to GPS data and other apps. - Conforming side grips securely keep device in place while allowing full access to ports and controls - Rotates 360° for portrait or landscape viewing - Rubberized platform prevents slipping - Compatible with virtually any smartphone, with or without case, up to 90mm/3.5 in. wide.
BEYOND PROTECTION Don't risk having your phone fall out of your pocket on the road or trails! The Rokform Pro Series Bike Mount features a dual retention lock system which encompasses both quarter turn RokLock mounting technology, as well as the guaranteed RokSafe magnet mountability. Just in case that's not enough, attach your Rokform wrist lanyard that's included with every case, and wrap it around your bike mount for an added layer of protection. YOUR WORLD AT YOUR FINGERTIPS When you ride with the aluminum iPhone bike mount, you will have easy access and a clear view of your device while you ride. Keep your navigation in view, but out of the way, throughout your next ride. Enjoy easy access to your favorite cycling apps like Strava, and total control of your favorite playlists. You'll always be able to screen your calls and texts so you only have to pull over for the very important ones. SLEEK STYLE Many riders are very passionate about the look and feel of their bike. Unfortunately, most Bike Mounts on the market are bulky and obstruct your handlebars, or can be cheaply made with zip ties and rubber bands, which can take away from the overall aesthetic of your bike. The Rokform iPhone 6/6s Pro Series Bike Mount Kit is the solution to this problem. Best of all? The Rokform Bike Mount's slim and sleek design fits nicely to the stem of your bike, so you'll never have to compromise in quality or looks. UNPARALLELED ADJUSTABILITY Everyone has their own unique style and tastes. When you ride with the Rokform Pro Series Bike Mount, you always have options to customize your ride, to suit your taste. Why settle for a immobile bike mount, when you can ride with the highly adjustable Rokform Pro Series Bike Mount? With a range of motion that allows you to tilt your Bike Mount and phone from -20 to +55 Degrees, you can always have the perfect view of your screen. SUPERIOR STRENGTH - EXTREMELY LIGHTWEIGHT The Rokform Pro Series Bike Mount is built strong, to withstand daily use and abuses, while always looking great and performing outstandingly. CNC Machined from 6061 T-6 aircraft grade aluminum, the pro series Apple iPhone bike mount by Rokform is feather-light and weighs less than 1 ounce. Not only will it never weigh your bike down, you will always ride assured that you have a trustworthy product, made of only the highest quality and toughest materials, holding your device in place. UNIVERSAL The Rokform iPhone Pro Series Bike Mount replaces the top cap of your bike's 1-1/8" threadless steer tube. Includes: -Rokform Pro Series Bike Mount -Rugged Case -Water Resistant Skin -Rokform Detachable Lanyard
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
The Rokform PRO-LITE Bike Mount keeps you connected as you ride. PRO-LITE is slim, low profile, lightweight and mounts solid in minutes with just a single anodized aluminum screw. Track your ride, view text messages, answer calls and more with ease. - Easy Installation: Install in minutes to 1/18" steer tubes with a strong anodized aluminum bolt - Secure Fit: Aircraft grade aluminum, twist lock and magnetic locking keeps your phone secure - Low Profile and Ultralight: Sleek look with less drag for better aerodynamics. - Adjustable Height: 2x 5mm spacers are included for a precise fit on almost any bike. - Lifetime warranty - Designed in California
Make the most of your Shimano Dura-Ace R9100 groupset by upgrading to Quarq’s DFour91 power meter, which embodies all the advances of the next-generation DZero platform. Designed especially for Shimano's Dura-Ace R9100 series, the Quarq DFour91 Power Meter brings Quarq's next-generation DZero platform to Shimano's latest groupset. Compatible with Ultegra R8000 chainrings. DFour91 embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth Low Energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. The DFour91 power meter is a bolt-on upgrade, pairing with the 11-speed Dura-Ace R9100 or Ultegra R8000 chainrings. Get the chassis, which includes Quarq's lightweight, sturdy Exogram carbon crank arms. The GXP and BB30 versions work with every bottom bracket shell, including BBright and BB386EVO. If you already have a power meter using the 8-bolt interface, upgrade with the DFour91 spider. Features & Benefits: - Exogram carbon crank arms - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Designed for Dura-Ace R9100 chainrings. Compatible with Ultegra R8000 chainrings. - Must be paired with a compatible SRAM bottom bracket. - BB30 versions ship with the spacers and wave washer required for BB386EVO installation. - 8-bolt power meter owners can upgrade using the DFour91 Power Meter Spider.
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black
$49.99 - $54.99
The Garmin XL Computer mount is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer, specifically designed to accommodate the EDGE 1000, 810 and 800, also compatible with the smaller Edge models like 520, 510, 500, in addition to the Forerunner and Touring models. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that K-Edge's replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. K-Edge provides free replacement inserts, as needed. Attributes (specs): - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars - New clamp design is hinged for ease of installation - Supported Computers – Garmin Edge 1000, 810, 800. Also compatible with new Garmin Edge 520, Edge 20 and Edge 25 models, in addition to Forerunner and Touring models. - Combo Compatible – Add the Action Camera Adapter or the complete Combo Mount for the added benefit of using both a computer and GoPro style interface action camera or
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
$39.99 - $44.99
The new Go Big On-Center Mount the next generation in K-EDGE's industry leading GoPro style interface Camera Mounts. The new mounts provide easier installation with a stronger more secure platform for your action camera, available in 31.8 and 35mm options. On-Center give you a better framed image with the newer style cameras that have lenses centered on the camera, such as the GoPro Session and Garmin VIRB. - CNC Machined 6061 T6 Aluminum - Compatibility – fits 31.8mm and 35mm diameter bars; all mounting hardware included; works with all GoPro HERO Original, HERO2, HERO3, and GoPro Session Cameras. Shimano CM-1000, Garmin VIRB, and Garmin VIRB X. - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *The NEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
$49.99 - $54.99
This is K-Edge's next generation of industry-leading Garmin Computer Mounts—stronger, easier, more versatile, and more stylish design to complement your Garmin and your bike. The ultimate upgrade for your Garmin computer. Their advanced co-polymer Garmin insert locks your computer in place with strength and security. Designed and tested extensively so that the replaceable insert breaks away instead of your computer tabs in the event of a crash or mishap. - CNC Machined 6061 T6 Aluminum - Compatibility – 31.8mm and 35mm diameter handlebars. - New clamp design is hinged for ease of installation. - Supported Computers – Most Garmin Edge, Forerunner, and Touring models, including the new Garmin Edge 520, Edge 20 and Edge 25 models (Edge 1000 - fits on the longer XL mount) - Combo Compatible – versions available that support GoPro style interface action cameras and lights - Weight – (31.8 mm) Standard Mount 45.4 grams; Combo Mount 55.4 grams Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. *TheNEW K-EDGE Handlebar Computer and Camera Mounts (1420, 1440, 1500, 1505, 1605, and 1905 series) are built in three parts. An integral part of our mounts are the connection where the arm and clamp are joined by two assembly bolts located on the underside of the mounts. THESE ASSEMBLY BOLTS ARE NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Garmin EDGE instructions that recommend use of the provided tether leash.
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state of the art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Bluetooth low energy technology and ANT+ wireless data transfer - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy. - 2-year warranty - IPX7 waterproof rating - Accuracy within 1.5% - Bottom Bracket Compatibility: SRAM GXP - Forged aluminum models do not work with BBright or BB386EVO bottom brackets
Page 1 of 9 Next page