Write a Review

Filter By:

  • Show More Brands

  • Show Fewer Brands

Power Meters

PowerTap Single-Sided Pedals
$699.99
Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
CycleOps ANT+ Speed or Cadence Sensor
$49.99
The CycleOps ANT+ Speed or Cadence Sensor accurately tracks your speed and cadence and is used along with a power meter or with an ANT+-compatible cycling computer (power meters and ANT+ computers sold separately). This unit easily attaches on the frame next to your left crankarm and rear wheel to monitor and display your cadence or speed on your cycling computer of choice.
CycleOps ANT+ Micro USB Adapter
$19.99
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Specialized Power Cranks Dura-Ace Dual
$1,500.00
No matter your skill level or experience on the bike, there's no better way to enhance your training and racing performance than by riding with a power meter. And for all of you Dura-Ace fans out there, we've combined our extremely light power sensors with a Shimano Dura-Ace crankset to give you the most accurate and precise power meter available. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the "real-world" accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Dual-Sided S-Works Power Cranks utilize separate strain gauge systems to individually measure the effort produced by each leg. This maximizes the accuracy of your total power numbers, plus it helps you to better understand your performance as fatigue increases and when you're recovering from injury. And with class-leading temperature compensation firmware and waterproof enclosures, Power Cranks are easy to live with. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO - Independent, dual-leg power measurement - Works with ANT+ and Bluetooth devices - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available) - Available in 170-175mm crankarm lengths - All models include 52/36T chainrings
SRAM RED Quarq Power Meter Crankset
$1,079.00
The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately
SRAM RED AXS Quarq Road Powermeter DUB
$1,200.00
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
Stages Cycling Stages Power Meter - Shimano Ultegra 6800
$799.99 - $1,099.99
Stages Cycling's Stages Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. It allows every rider, in every discipline, power-based (also called watt-based) training performance. With advanced technology accurate to +/- 2%, ANT+ and Bluetooth Smart transmitting, active temperature compensation, and mere 20 grams of weight, the Stages Power meter is perfect for any cyclist whether looking for their first power meter or a savvy power-training expert. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. This Stages Power Meter model is available as a Shimano Ultegra 6800 replacement left (non-drive) crankarm (shown) or integrated into the crankarm on a complete Shimano Ultegra Standard (53/39-tooth chainrings), Compact (50/34) crankset, or Mid-Compact (52/36) crankset (bottom bracket sold separately).
Quarq DFour91 Power Meter Chassis
$1,179.00 - $1,179.99
Every innovation in Quarq’s next-generation DZero platform is channeled into DFour: 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the new Qalvin BLE app. The DFour91 is designed for Shimano’s Dura-Ace R9100 chainrings. It uses Quarq’s lightweight, sturdy ExogramTM carbon crank arms. GXP and BB30 versions work with every bottom bracket shell, including BBright and BB386EVO. - DFour is designed for Dura-Ace 9000 chainrings and compatible with Ultegra 6800 and 105 5800 chainrings - DFour91 is designed for Dura-Ace R9100 chainrings - Must be paired with a compatible SRAM bottom bracket - 8-bolt power meter owners can upgrade using a DFour or DFour91 power meter spider - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad -- no cadence magnet required - 10K Temperature Compensation - Battery — CR2032, 200-hour battery life, change without tools - OmniCal — swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy — within 1.5%, measuring both legs - Chainrings and bottom bracket sold separately
Pioneer Shimano Dura Ace 9000 Crankset Power Meter
$850.00
Pioneer's full crankset power meters are simply some of the best power-monitoring systems on the planet. The Pioneer Shimano Dura Ace 9000 crankset is your chance to ride the same technology used by the world's best riders, ensconced in one of the most aesthetically pleasing cranksets ever created. Pioneer's created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, in real time, allowing you to analyze and adjust your technique on the fly. At the heart of the Pioneer Power Meter System are two streamlined strain gauge monitors that detect the slightest tangent and radial-force direction as power is applied to the crank arms. This proprietary system detects the amount and direction of force at 12 different points in each pedaling stroke for each leg, letting you fine-tune your pedaling to find race-winning form. With advanced technology accurate to +/- 2%, ANT+ transmitting, and active temperature compensation, the Pioneer power meter is perfect for any cyclist. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. - Standard: 53/39 - Mid-Compact: 52/36 - Compact: 50/34
Pioneer Shimano Ultegra 6800 Crankset Power Meter
$650.00
Pioneer's full crankset power meters are simply some of the best power-monitoring systems on the planet, and Pioneer's Shimano Ultegra 6800 crankset is your chance to ride the same technology used by the world's best riders. Pioneer's created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, in real time, so you can analyze and adjust your technique on the fly. At the heart of Pioneer's Power Meter System are two streamlined strain gauge monitors that can detect the slightest tangent and radial force direction as power's applied to the crank arms. This proprietary system detects the amount and direction of force at 12 different points in each pedaling stroke for each leg, allowing you to fine-tune your pedaling to find race-winning form. With advanced technology accurate to +/- 2%, ANT+ transmitting, active temperature compensation, Pioneer's power meter is perfect for any cyclist. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. - Standard: 53/39 - Mid-Compact: 52/36 - Compact: 50/34
Quarq DFour Power Meter Crankset
$1,179.00
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DFour measures power in the heart of the bicycle — the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DFour represents the state of the art in power meter technology. Every innovation in Quarq’s next-generation DZero platform is channeled into the DFour Power Meter Crankset. It embodies 10 years of Quarq technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and compatibility with BB386EVO bottom brackets. - The DFour power meter is a bolt-on upgrade for Shimano’s 11-speed Dura-Ace 9000, Ultegra 6800 and 105 5800 drivetrains. - Must be paired with a compatible SRAM bottom bracket. - ELSA RS power meter owners can upgrade using the DFour Power Meter Spider. - Free firmware upgrades with the Qalvin app. - Compatible with BB30 bottom bracket. - BB30 versions ship with the spacers and wave washer required for BB386EVO installation.
Quarq DZero Carbon Power Meter Crankset
$1,079.00
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state of the art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and, for the carbon version, compatibility with BB386EVO bottom brackets. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Material: CNC Machined Aluminum Spider, Exogram Carbon Crank Arms - Accuracy: 1.5% - Bolt Circle Diameter: 130 BCD, 110 BCD - Q-Factor: 145mm - Wireless Technology: ANT+, Bluetooth low energy technology - Battery: CR2032, 200 hours of riding time - Weight: 578/559 grams (130/110 BCD) - Head Unit Compability: ANT+ and Bluetooth low energy technology compatible head units (available separately) - Compatibility: Traditional 5 bolt chainrings from most manufacturers. Hidden (HB) and Non-hidden Bolt (NHB) patterns. 10-speed, 11-speed, 1X and 2X. *Not compatible with Campagnolo chainrings
Specialized S-Works Power Cranks - Dual-Sided
$1,150.00
No matter your skill level or experience on the bike, there's no better way to enhance your training and racing performance than by riding with a power meter. Lucky for you, Specialized has combined their incredibly light and stiff carbon fiber S-Works road cranks with dual-sided power measurement, making it the lightest (440g/172.5mm) and most accurate power meter available. The development of Power Cranks began with Specialized's Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, they found that neither of these methods answer the "real-world" accuracy question. To get the best test for accuracy, in all types of riding scenarios, Specialized built their own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets them evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is their gold-standard for testing power meters, and through their testing and external validation from the Locomotion lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real world scenarios (+/- 1.5%). The Dual-Sided S-Works Power Cranks utilize separate strain gauge systems to individually measure the effort produced by each leg. This maximizes the accuracy of your total power numbers, plus it helps you to better understand your performance as fatigue increases and when you're recovering from injury. And with class-leading temperature compensation firmware and waterproof enclosures, Power Cranks are easy to live with. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/-1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Independent, dual-leg power measurement. - Works with ANT+ and Bluetooth devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Hollow carbon crankarms, carbon spider, and oversized alloy spindle offer superior stiffness and lighter weight than the competition—440 grams for 172.5mm crankarm length. - Fits Specialized road frames with OSBB or PF30 bottom bracket shell, as well as most BB30 road frames. - 110 BCD carbon spider (also compatible with 130 BCD carbon spider—sold separately). - Compatible with Shimano and SRAM drivetrains. Chainrings are sold separately. Use only with Specialized/Praxis chainrings 06217-1702 (52/36T) and 06218-1713 (50/34T). - Available in 165-180mm crankarm lengths.
Specialized Power Cranks - Shimano Ultegra Upgrade Kit
$525.00
Whether you're looking to take your training to the next level or you simply want a better way to measure energy expenditure, a power meter is your best bet. And the Power Cranks Ultegra Upgrade Kit are no exception. With our lightweight power sensors on a Shimano Ultegra crankarm, it's the perfect way to enter the power meter game. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the 'real-world' accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Power Cranks are also easy to live with, with class-leading temperature compensation firmware and waterproof enclosures. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Works with ANT+ and Bluetooth® devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Shimano 8000 generation Ultegra left-side power measurement. - Right crankarm and spider NOT included. - Available in 170-175mm crankarm lengths.
SRAM RED AXS Power Meter Upgrade Kit
$819.00
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: Ant USB
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,200.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
Pioneer Shimano Dura Ace 9000 Single Leg Power Meter
$629.99
Pioneer's Shimano Dura Ace 9000 Power Meter is a revolutionary power meter that attaches stealthily to the left crankarm. The Dura Ace 9000 left crank arm meter allows every rider power-based (also called watt-based) training performance, allowing you to fine-tune your pedaling to find race-winning form without breaking the bank. With advanced technology accurate to +/- 2%, ANT+ transmitting, active temperature compensation, and a mere 22 grams of weight, the Pioneer power meter is perfect for any cyclist. Additionally, installation is fast, simple, and clean with zero wires, magnets, or zip ties. If you find yourself addicted to the data and crave more, upgrade kits that retroactively add drive-side power are available (sold separately).
Pioneer SGX-CA500 GPS Cycle Computer
$299.99
Pioneer's power meters are simply some of the best power-monitoring systems on the planet, and the SGX-CA500 computer is your chance to get the most out of your power meter and have a world-class data display. Pioneer has created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, and the SGX-CA500 lets you analyze this data in real time. A few quick swipes give you access to your state-of-the-art ride data, and intuitive controls allow for scrolling, zooming, and screen customization to let you see what you want, when you want it. The 1.87-inch LCD screen makes it incredibly easy to see critical data, even if you are on the rivet up the final climb. As an added bonus, users of Shimano’s Di2 electronic road bicycle shifting system can now utilize the SGX-CA500 to track gearing and system status as they ride. - Delivers high functionality for practical situations, in a small, lightweight (75 g) package - Visualizes pedaling state and efficiency through graphical displays of force vectors (when used together with a pedaling monitor sensor) - Enables new modes of training focused on pedaling skill development - Displays over 100 data types, such as power, cadence, speed, and incline, all in real time - Easy, intuitive touch-panel operation, even when wearing full-finger gloves - Upload data to Cyclo-Sphere, our online data analysis service, via USB or Wi-Fi connection (Wi-Fi Internet connection required) - Weight: About 75 g - Dimensions: 58 mm (W) x 58 mm (H) x 19 mm (D) (without projection parts) - Connector: microUSB - Water-resistance: This device has a water-resistance rating of IPX-6/IPX-7 - Communications system (sensors): ANT+ - Communications method (network): Wi-Fi - Positioning system (latitude/longitude): GPS - Positioning system (altitude): Atmospheric pressure sensor - Display: 160x128 pixel, horizontal 1.87-inch outdoor type, Black and white touch panel (resistive touch display) - Built-in flash memory: 4 GB (user available capacity 3 GB) - Guaranteed operational temperature range: -10 to 50°C - Charging temperature: 0 to 45°C - Power supply voltage: DC 5V - Battery type: Lithium-ion battery - Battery operating time: Approximately 12 hours (the battery operating time may decrease depending on the operating conditions) - Charging time: Approximately 4 hours (Power off or normal charging) - Accessories: Bracket, USB cable, Strap, Quick Start Guide, Warranty card, Important Information for the User - Specifications and design are subject to change without notice.
PowerTap C1 Chainrings w/Sensor
$699.99
The C1 chainring is a full featured, crank-based power meter that features dual-sided measurement. The FSA-made, one-piece chainring design provides added stiffness for shifting no matter the terrain. Available in 53/39, 52/36 and 50/36 chainring tooth options for 5 bolt, 110 BCD cranks, the C1 mounts to existing hardware on the bike. Additionally, dual band ANT+ and Bluetooth SMART connectivity make the C1 an obvious choice for riders looking for more features and better value.
Quarq DZero Power Meter Spider for Specialized
$779.00
DZero is Quarq's next-generation power meter platform for those who live to be challenged, pushed, and tested in the toughest scenarios imaginable. Now Quarq has introduced a DZero spider designed to replace the factory spider on Specialized's S-Works carbon crankset. Quarq DZero for Specialized embodies 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the Qalvin BLE app. You also get AxCad accelerometer cadence, the easy-to-replace CR2032 battery, an IPX7 waterproof rating and a 2-year warranty. Features & Benefits: - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad – no cadence magnet required - 10K Temperature Compensation - Battery – CR2032, 200-hour battery life, change without tools - Power Balance - OmniCal – swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy – within 1.5%, measuring both legs - Free firmware upgrades with the Qalvin app Essential Details: - Traditional 5-arm spider compatible with Specialized S-Works Carbon Road Crank Arms from 2013-Current. - Available in 130 BCD and 110 BCD. - Replaces the standard spider. - A Specialized lockring tool is required for installation.
Race Face CINCH Power Meter Spindle
$599.99
The CINCH Power Meter gives you the tool to train for the Enduro and XC glory you truly deserve. Protected in your BB Shell, the CINCH Power Meter not only gives you the advantage you need to gauge your training and push your boundaries, but it does it with the compatibility and performance you have come to expect from CINCH. Thanks to the adaptable spindle, you can pick your poison from NEXT SL G4 to Turbine R cranks, and with the Race Face CINCH App and both ANT+ and Bluetooth, you can hook it up to your favorite head unit and be on your way to the wattage cottage in no time. - Power Accuracy +/- 2% - Cadence & pedal efficiency data - Dual Bluetooth low energy technology / ANT+ for head unit compatibility - Battery life over 400h & USB rechargeable - Utilizing CINCH for 1x or 2x configurations - Cinch Power Meter App for iPhone or Android - Just 65g more than standard 134mm mountain spindle
Specialized Power Cranks - Shimano 105 Upgrade Kit
$425.00
Whether you're looking to take your training to the next level or you simply want a better way to measure energy expenditure, a power meter is your best bet. And the Power Cranks 105 Upgrade Kit are no exception. With our lightweight power sensors on a Shimano 105 crankarm, it's the perfect way to enter the power meter game. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the 'real-world' accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Power Cranks are also easy to live with, with class-leading temperature compensation firmware and waterproof enclosures. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Works with ANT+ and Bluetooth devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Shimano 5800 generation 105 left-side power measurement. - Right crankarm and spider NOT included. - Available in 170-175mm crankarm lengths.
Garmin Vector 3S Single-Sensing Power Meter
$599.99
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Garmin Vector 2
$999.99
Garmin brings power to the pedal with the Vector 2. Built in conjunction with Look Keo pedals, the Vector offers precise power measurement in a rugged, ultra-convenient, discreet package. Garmin encased sensitive strain gauges inside the stainless steel pedal spindles for years of durability and accuracy to within +/- 2%. The Vector is essentially two separate power meters and measures power from both legs, meaning you have the data to correct discrepancies between your left and right sides. Now you can eke out those last few watts and maximize your pedaling economy. The robust Vector 2S pods are easy to mount, and have a status light indicating when they're on and pairing occurs. Switching the pedals and pods between bikes is blissfully hassle-free and takes less time than getting kitted up. The pedal bodies are built of tough, light carbon, while the battery/ANT+ pods hang protected beneath the crank arms. At a nimble 312 grams including pedal weight, the Vector is one of the lightest power meters available.
Easton EC90 SL CINCH Power Meter
$599.99
The CINCH Power Meter utilizes spindle-based power paired with our highly adaptable EC90 SL Crankset giving you the flexibility to evolve your setup to your needs. Racing 1x for CX? Done, 2x for road? Simple. Changing from 170mm cranks arms to 172.5? You don’t have to buy a new power meter, just move the spindle. Fitting EC90SL to a mountain bike BB shell? Consider the 134mm MTB spindle. With an easily-accessible 400+ hour rechargable battery, The CINCH Power Meter only adds 65g to the EC90 SL’s industry-leading lightweight crankset, providing you cadence readings and calculated pedal efficiency in a clean and protected spindle. And with the CINCH App, you can check battery levels, install updates and calibrate your power meter on the fly.
Kinetic inRide
$49.00
Benefit from tracking the most interesting, accurate, valuable, motivating and fun information while you're riding your Kinetic trainer with their inRide Watt Meter. It uses Bluetooth communication technology to pair a power sensor pod with Kinetic's inRide iPhone app so you can track your wattage with any Kinetic fluid trainer (smartphones and trainers sold separately). Tailor your workouts to meet your riding goals by logging your entire workout history, and even email your data to a coach for analysis, training, and planning. With the easy-to-install sensor and quick-download app, you'll be rolling and logging data in no time.
SRAM RED AXS Power Meter Spider
$599.00
- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB
Page 1 of 1